Your location > Home > Rec-Proposal > High PF Non-Flicker LED driver solution
0

High PF Non-Flicker LED driver solution

Sources : Network Published:2014-07-02 01:28 | 2621 browse

Zentel

ZA8508,高PF,纹波消除,纹波抑制,无频闪

ZA8606 APFC non isolated driving core, high PF (0.92~0.99), high efficiency reached 93%,the output of 30~80V linear adjustment rate is less than ± 3% full voltage input, DIM pin can be linear dimming and PWM dimming (widely used for voice, radar sensing, infrared controlintelligent control lamp) is less than 40W within the application of high PF high efficiency nonisolation drive scheme (LED fluorescent lamp, /LED panel lights /LED bulb lamp, /LED ceiling lamps) authenticated BOM low cost (EMI certification, CE certification, CCC certification, TUV certification, FCC certification)


ZA8706B
APFC built-in MOS non isolated driving chip, built-in 650V/2A MOS, high PF(0.92~0.99), high efficiency reached 93%, the output of 30~80V linear adjustment rate is less than ± 3% full voltage input, 90~132V input can drive 13W power, 180~264V 16W powerinput can be driven, can drive 15W power voltage input, a certified BOM cost is low.


ZA8706C
APFC built-in MOS non isolated driving chip, built-in 650V/4A MOS, high PF(0.92~0.99), high efficiency reached 93%, the output of 30~80V linear adjustment rate is less than ± 3% full voltage input, 90~132V input can drive 16W power, 180~264V 23W powerinput can be driven, can drive 18W power voltage input, a certified BOM cost is low.


ZA8508 built-in MOS, maximum driving current of 1A, adaptive current ripple cancellationchip, high PF ripple suppression control chip, is used to solve the high PF no flash LED driver applications


ZA8806
high pressure quick start APFC non isolated LED driver chip, low THD, PF>0.9,>90%, BOM efficiency, low cost, active PFC non isolated LED constant current drive IC,highest efficiency of 93%, applied to 40 Watt within design, IC consistency ± 3%, has nothing to do with the inductance variation, linear adjustment rate is less than ± 3%, constant flow error is less than ± 3%. Support the whole input voltage (90~264V) and linear adjustment rate! The output can be compatible with a power of 12 series ~24 on board, and the output current changes within 3%!


ZA8607
APFC/ low THD/ non isolated /Stemp Dimming LED driver, SOT23-6, widely used inbulb lamp, down light, PAR lamp, fluorescent lamp, ceiling lamp, lamp panel


ZA8707B/ZA8707C APFC/ non isolated buck / / built-in MOS/ low THD/Stemp Dimming, PF up to 0.95


ZA8807- APFC, Fast start,low THD, Stemp Dimming, PF up to 0.95


ZA8106-APFC/ isolated
flyback / buck / primary side feedback, SOT23-6, Stemp, Dimming,efficiency '85%, isolated primary side APFC driver


ZA8206
APFC/ isolated flyback / built-in MOS/ primary side feedback, SOP8, Stemp,Dimming, efficiency '85%, built-in MOS isolated primary side APFC driver


ZA8306
APFC/ isolated flyback / buck / primary side feedback, SOP8, Stemp, Dimming,efficiency '85%, quick start isolating primary side PFC driver chip high voltage


ZA8107
APFC/ isolated flyback / buck / primary side feedback, SOP8, support linear dimming/PWM dimming, efficiency '85%, Isolated LED AC-DC PWM Controller with Aux Power


ZA8207 - APFC/ built-in MOS isolated flyback / buck / primary side feedback, SOP8, support linear dimming /PWM dimming, efficiency '85%, Isolated LED AC-DC PWM Controller with AuxPower


The information comes from the network, if the infringement, please contact us!QQ message

Comment

No comment!

You can share your thoughts with other users(Limit: not less than five characters)

You are going to comment as a visitor, if you are member, you can [SignIn] or [Register] as a site member